Another bit further!

Time for a little more progress...

It's been kind of a slow run crafting-wise due to, well, life...the universe...and everything, but at least I was able to get some more stitching time in. It's been so long since I did the banners for the other houses, however, that I forgot that I had changed the background banner color to a lighter shade intentionally. 

Total freak out moment - I thought I was going to have to go back and redo it all! 

Turns out, the memory got jogged a little more when I did a color comparison with the colors that I actually used and the colors called for in the pattern. On comparison, the Gryffindor lion would sort of blend a little too well, in my opinion, with the background parchment color, so I used a lighter one to give it a little more contrast. Hope this tip helps if anyone else doing these Harry Potter patterns runs into the same issue!

Progress is progress, right?

Just a quick update...

Well, it's been a busy couple of weeks, but I did have a little time to squeeze in some more stitching. Here is the current progress update - I managed to finish the rest of the green on the Slytherin banner, so hopefully the rest of it will proceed much faster. Aside from the background tan/cream color of the banner, of course!

Stitching update, a blast from the past, and yet another glass experiment gone wrong.

Stitching Update - Harry Potter Pillow Project

First off, a quick update on the Harry Potter Pillow Project. I've gotten the rest of the top border completed, and started the snake on the Slytherin banner. I'll continue to work on that, even if the progress is just sort of inching along. I've got a lot going on with work and real life right now, but hey - progress is progress, right?

Next up on the list after the two banners will be...more borders! The lower half, to be precise. I'll update the stitch counter once I've had a chance to sit down and *gulp* count the stitches...

A blast from the past!

There seems to always be that friend of the family - someone close enough to the point where the line between blood and friendship blurs, and nobody really cares that there's no actual blood relation at all. They're usually "Uncle" or "Aunt" or some other moniker. 

My sisters and I, and my parents of course, had Mrs. Roby, or "Mrs. R" as we affectionately called her - but never to her face, of course. She was another Grandmother to my sisters and I, and somewhat of a beloved Auntie sort of figure for my mom. 

When Mrs. R. finally passed away, she tried to leave something for each of my sisters - I've finally located the old sewing box that she wanted me to have. It's fallen into a little bit of disrepair, but unfortunately life sort of gets in the way and it had to go into storage for an unforseen amount of time. It's an old box, one that she used to keep around for minor repairs and mending. I had shown interest in embroidery and cross stitch at some point when I was little, so she decided that among her various items, this one was mine.

Now that I've had a chance to get it out of storage, there'll need to be some obvious cleanup work - there's plenty of dust, but other than some discoloration, the wood itself is in surprisingly good shape,with maybe a couple knicks here and there and the occasional scuff.. A little oil and some elbow grease should have it back in good shape, though I'm almost hesitant to start on the restoration work since I'm not sure what might ruin it or if there's a "proper way" to restore it. Once I can make some room in my house for it, it's going to be the first addition to an eventual Stitching Corner!

And finally, some not-so-Lucky Charms. 

So...I found out that charms don't hold up so well at high temperatures.

The "before" picture

In retrospect, I should probably have known, but I couldn't help but hope that they might hold their shape instead of melting into an amorphous blob. 

In this batch, I've learned a couple things. First, that there is probably a limit to how many pieces can go into a firing before you have to either lengthen the firing program, or up the heat. I'm thinking that in this case, the limit for my kiln without going for a longer firing program will probably be around 4-6 pieces max.

Second, charms are cute and all, but better left for resin or bead work. As you can see, the shapes didn't hold up so well, with the little star/moon charm being the only recognizable piece left.

Three, there are only so many times a piece can be fired before it just says, "No way, I'm not going to do what you want me to do. EVER." See the top left two pieces for examples.

The "after" picture

So, while there were some interesting results, there aren't any that I would really want to turn into a finished piece for purposes of selling. The three top right pieces (the orange/white and two small blue cabochons) are the only salvageable pieces for such a purpose, but that's alright - I'm learning more about what my kiln can and can't do with each experiment and each firing, so I don't count it that big a loss!

Off to more experimentation!

Second test firing!

So far, the kiln has been working like a charm.

First, it's kind of fun to do a comparison of what the glass pieces look before and after they're fired. For example, let's take a look at my second batch of test pieces.

These are the "before" pieces. As you can see, we have a lot of actual corners/edges, and a bunch of them are quite rough. The blue and green pieces I was especially interested in, since I was testing some tube-style glass beads for detail work.

The squarish piece up top and the white/green/orange oval at the bottom were another experiment to see if they would completely flatten out, or if they would just tack-fuse together. Those who spotted the purple cabochon in the center might recognize it from the first test fire...just because it's a failed piece doesn't mean it stays a failed piece when it comes to glass fusing!

And now take a look at the final product.

First, I was really pleased with the white/orange/green oval - it's good enough for me to consider selling it on Etsy once I get my store put together. It and the square below it succeeded in completely fusing into solid pieces, as I had hoped.

The green piece, I was kind of meh on the overall product, but it served it's purpose - the lines of glass tube beads formed nice neat lines, which show that I can use them for decorative purposes to try to create some patterns.

The blue piece had a similar result, but didn't fully fuse - back into the kiln, it's going!

The dark square-ish cabochons might be sellable as a set of earrings, but I really am thinking they could use some sort of extra embellishment in the centers.

As for the slagged bit in the upper right...I'm not sure what to do with it, since it was a bunch of scrap pieces to start with. I'm thinking I'll add another piece in the center and try re-fusing it. Back to the kiln with you!

And finally...the little purple cabochon was from the first test firing, but I accidentally put it upside down. This time, I turned it right-side up, and thankfully it re-fused properly.

Kingpin 88 without bead door, with viewing window
as shown on the http://www.cooltools.com/ website.

In closing, I'd like to say that I am really happy with my Evenheat Kingpin 88 kiln. It may be small - the chamber is approximately 6"x8"x8" in dimension - but I am not yet at the point where I need anything larger. The heat venting has been designed to keep from venting massive amounts of heat all around it, focusing it and insulating it so that you really don't feel any external heat coming off of it aside from the top (which is still minimal, and doesn't feel much warmer than holding a hand up to a heater vent), and some from the front. The front heat is understandable, as the model that I have has a viewing window and bead door, so it won't have the same fully seal capability that a solid door would.

The programming was a little harder than I had hoped to figure out, but the kiln does come with a DVD that has instructional videos, and the same videos are available on Evenheat's website and Youtube. After a quick review, I found that selecting the options for glass was surprisingly easy - there are settings for 90COE, 96COE, and I believe 87COE, as well as options for full fusing, slumping, and tack fusing. There are also options for selecting whether you want a fast fuse, medium fuse, slow or super slow fuse, so there really is a broad spectrum of options depending on which project you're going for.

For the most part, the process is simple: place firing shelf in kiln. Place firing paper on shelf (or use kiln wash if that's your thing, but the paper is SO easy to clean up and apply) and place products on top of the paper. Shut the door. Plug kiln in, power it on, select your program, and off you go!

Granted this is my first kiln, so I really haven't had a chance to do a comparison with other models (since they're kind of expensive!), but if anyone wants a recommendation for a good starter kiln, I'd say that the Kingpin 88 has my vote.

It's been a long time.

It's been far too long since my last post, but here we go!

Real life has sort of gotten in the way, and there've been some major changes that have taken up a lot more of my time than I would have liked. That being said, I think things have finally settled down a bit, and it's time to get caught up.

Kanzashi!

First off, I've learned a new kanzashi-type cloth flower. This flower was inspired by a lotus flower, but is more like a water lily. It looked close enough to make my niece happy though - this was the flower she had wanted when I showed her my kanzashi book a couple of years ago. This one was crafted from ribbon, fake stamens, and a pearled center. I attached it to a hair comb, and voila!

One thing I have found to work differently than the instructional videos that I watched, however, is the backing. In the videos, the artist uses circular pieces of felt to attach each petal to. I have found felt to be somewhat finicky, oddly enough, and it never seems to work out properly. Plus, I have found that even E4000 glue (I think that's the name?) tends to have a hard time sticking sometimes.

As an alternative, I've started using foam sheets. I still have to cut out a circle, but the flatter surface seems to take the glue much better and makes a much easier mounting surface for the petals.

Here is a link to the how-to video on creating your own lotus or water lily: https://www.youtube.com/watch?v=16dxN5KREck

New, yet old stitching basket!

Recently, my mom moved out of her house, and while we were packing, she stumbled across some treasures. One of them was the old stand-up sewing box that belonged to an old friend of our family, and was like another grandmother to us. I'll have to post a picture of it once I've gotten it back to its full glory.

Another little treasure was her mother's sewing basket - it looks to be in surprisingly good condition, considering it's older than I am. I think the only thing missing is a latch or hook of some kind that goes on the front. The top is slightly padded, and on the inside, there is a polyester satin lining with a pocket for needles, buttons, and other odds and ends. Also on the inner lid is a small pincushion - perfect for needles and such! It's just the right size to take projects with me on the go.

A new progress report on the Harry Potter Pillow Project!

Good grief...It's been so long since I've posted an update on this one. But here we are...I've almost gotten the right corner finished, as well as the red and white parts of the corner. Next will be the Slytherin and Hufflepuff banners. 

Finally...It's Fusing Time!!!

And no, not electrical fuses. Or fusion cooking, for that matter. We're talking about glass fusing - dichroic glass to be precise. 

I've gone and fallen in love with the art, since it has the capability of generating some truly beautiful pieces of artwork and jewelry. The first time I tried it was a panel at Gencon in Indianapolis last year, and I was hooked. The fact that it can turn out totally different than what you originally intended is just one of the draws - that alone can be either exciting or annoying, since it comes out as a surprise every time. 

Dichroic glass, for those who aren't familiar with it, is glass that has been layered with a dichroic film. There have been many uses for it in the scientific community, such as the windshield of the Space Shuttle and laser technology, and it has more recently filtered into the art world as well. One of the advantages of this form of art is that due to the nature of glass art in general, no two pieces are ever going to be the same - each piece has different factors involved, such as the cut of glass and the pieces used to create it, and unless you use a mold of some kind, the glass sort of just flows where it will. 

One of the most important pieces to have if you plan to fuse glass is, of course, the kiln. My mother was kind enough to gift me with a brand new Evenheat Kingpin 88 kiln with glass viewing window and bead annealing door. This sort of kiln is one of the more versatile personal studio models; its heat controls have preset schedules for ceramics/clay, metal-clay, and glass - with sub-settings for each, such as being able to select either a fast or medium fuse, or to select what glass coefficient you're going for. 

Today, I ran my first test-fire, and I don't think the pieces turned out too bad! One piece I did apparently put in the kiln upside down, somehow, so it won't make a set of earrings like I had hoped. Other pieces, however, turned out quite nicely - the white/amber/green piece is one that I'm particularly fond of. The white and lavender piece was more of an experiment - I took glass beads and placed them on the glass back piece just to see what would happen. The result looks somewhat like a small organism found in a scientific sample of...something...but it might prove useful for decorations later on. 

Thank you for reading!

Gearing up for the craft fair.

I've been working on some items for the craft fair, and figured it might be a bit easier to just cut what I could of the required cloth ahead of time.

 I've been trying to stick to the thicker cloths, or those with a satiny sheen. Not only do they look better on the finished product, but they tend to hold the shape of the petals better.

And here's one of the roses I've been trying to work on, which I found on YouTube - https://www.youtube.com/watch?v=lNjYNds5ZmQ&spfreload=1. The first one turned out alright, but I think I need to find a better glue option since the petals are still a little loose. All in all, I'm happy with the first prototype.

It's been a while!

I've been pretty busy dealing with an injured husband, job changes, and a pretty nasty case of sinus crud over the winter, but I managed to take a little time today to experiment a little for an upcoming project - pot handle covers. The initial set will be for a friend, but if I can get the patterns down in a workable fashion, I'm tempted to make some for the craft fair that I'll be going to with a friend and see whether or not there's any interest. We'll be sharing a table, and hopefully I can bring enough goodies to make as good a showing as she will - she's got some pretty cool goodies!

Among other things I'll be taking are some kanzashi headbands, maybe some hair combs, and whatever else I can come up with in a couple of months worth of time. One challenge I saw was to try to use some of the techniques with 3D origami to see if I can make anything cool using kanzashi petals. I'm looking forward to it!

There are a lot of different patterns, but one I haven't used in a while was a good old fashioned Braid.

I'm still deciding whether I like the patterns altogether or not, but we'll see how they turn out!